TCGE-0524-IR00
Drawing Hydraulic symbol
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Eltfluid also reserves the right to modify all the above data, at any time.
0
30
60
90
120
150
180
0 50 100 150 200 250 300 350
0
10
20
30
40
0 1000 2000 3000 4000 5000
Flow l/min
gpm
Flow vs Load pressure
Pressure Psi
bar
Pressure drop
Performance graph
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
Flow control valves
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
Pressure drop
4.16.001.1
TECHNICAL DATA
HYDRAULIC
Max. working
pressure:
350 bar (5.075 psi)
Flow rate: See performance graph
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage: 350 cc/min
P max. 350 bar (5.075 psi)
Standard seals: O-ring NBR
Back-up ring Polyurethane
Cavity: SCS1630
Installation torque: 65 N/m
Max contamination
level:
NAS 8 ISO 4406 19/17/14
Fluid temperature
range:
From -20 °C to +80 °C
Seals kit std.: 5AG0055
L16S-3C00 - 0
Description
Logic element cartridge valve, spool type, hydraulic directional
element, with multifunction, when used with other device, can work
as flow or pressure control.
Operation mode
Logic element spring-based, spool with shift to allow full flow from
1 to 2 only when pressure at 1 exceeds the cumulative pressure of
3, plus the spring pressure value.
Pilot-to-close directional valve. With no pressure at 3, flow will be
allowed from 1 to 2 once the spring force is overcome by pressure at 1.
GENERAL DATA
Weight: 0,32 Kg (0,7 lbs).
Ambient temperature range: -30 C° a 60 C° with standard seals (NBR).
Max. proof pressure: 420 bar (6.090 psi).
Flow Max: 200 l/min (52,8 gpm).
Cartridge materials: high strength steel, internal parts hardened and
grinding.
Logic element 3 way piloted,
spool-type, normally closed
TCGE-0524-IR00
Ordering code
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
mail: info@eltfluid.com
P.IVA/C.F 02573790355
Seals
Housing size ports
A- Aluminium
Material std. housing
S- Steel
None (std. NBR+Polyurethane)
Y- Polyurethane
Inches
Millimeters
-
Dimensions
For other options
contact Sales dept.
None (std. only cartridge)
Spring
STANDARD HOUSING
Ordering code: See page 9.05.002
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.003.
C- 2,5 bar (36 psi)
E- 5,5 bar (80 psi)
G- 7 bar (101 psi)
L- 11 bar (159 psi)
A- 0,7 bar (10 psi)
N- 16 bar (232 psi)
5B- 3/4” BSP
6B- 1” BSP
4.16.001.2
L16S-3C00 - 0
81)$
+H[
L16S-3C00-0
